Intex Aqua I5 mini Flash done with SP Flash tool (tested)

In this device problem of auto data connection start, wifi automatically start, hidden application automatically install, auto balance gone so try first of intex aqua i5 mini reset or hard reset but same issue not solve this problem then i decide to flash device when i flashed device with below link firmware or tool so result problem solved all type issue but not only use this tutorial above mention problem but any try software related issue in this device then you can use this tutorial but remember first carefully all read tutorial after step by step following.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua I5 mini Firmware download here

SP_Flash_Tool_v5.1343.01 Flash tool download here

What's needed for flash ?

1. Intex Aqua I5 mini device with good battery charged

2. Intex Aqau I5 mini tested firmware or flash tool (link are above)

3. Micro usb cable (with good quality)

4. Computer or Laptop

How to Flash ?

1. Download tested firmware from above link (if link not working then just leave your comment on below comment box)

2. Extract both winrar file to desktop or as you like path (must installed winrar software in your computer or laptop)

3. Open SP_Flash_Tool_v5.1343.01 folder and choose flash_tool.exe file and open it

4. Click on Scatter-loading button and choose MT6582_Android_scatter.txt file from firmware folder

5. Now click on Download button

6. Press and hold Volume Up button and insert usb cable (device key, device usb socket or micro usb cable must working well)

7. Wait until driver install, if driver installed in your computer or laptop then downloading automatically start into device

8. Wait until full install (do not disconnect device while device in flashing mode)

9. Congratulation you are done from many software issue

Intex Aqua I5 mini Flash done with SP Flash tool screenshot:

Intex Aqua I5 mini Flash done with SP Flash tool video HERE

Read More

How to Flash Intex Aqua Y2 1GB with flash tool ? with simple method

About this tutorial or firmware:

This intex Aqua Y2 1GB  device in hang issue when customer take in my shop then i try first i check shorting in device but there no any shorting in any side, if not shorting in device from all side after check first in software when i try in flash with sp flash tool then device working well my suggestion for everyone who work in android device in software related first check device in hardware after try in flashing because if device short and try in flash then device will be dead or other issue.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes. 

Download Link

Intex Aqua Y2 1GB Firmware or flash tool download here

Required for flash:

1. Intex Aqua Y2 1GB device with good battery charged (note : do not try with low battery)

2. Intex Aqua Y2 1Gb tested firmware or flash tool where above link you can download from there

3. Micro usb cable

4. Computer or Laptop

Procedure:

1. Take firmware or flash tool from above link (if link not working just write down comment on below comment box)

2. Extract to desktop or as you like path ( must installed winrar software in your computer or laptop)

3. Open SPD Upgrade Tool vR2.9.9015 folder and open UpgradeDownload.exe file

4. Click on Firmware button and choose W230IN2_RAM1GB_user_14175_150420.123438.pac file from firmware folder

5. Now Click on Download button

6. Press and hold Volume Down button and insert usb cable into device

7. Wait until driver install, if driver installed in your computer or laptop then downloading start in device automatically

8. Wait until full install android os (note : do not disconnect while device in flashing mode

9. Congratulation you are done from above mention issues

Intex Aqua Y2 1GB Flash done with flash tool screenshot:

Intex Aqua Y2 1GB Flash done with flash tool video:

Read More

How to flash Intex Aqua Desire flash with sp flash tool ? see here with simple method

About Firmware or Tutorial:

This is tested firmware or flash tool you can do using this tutorial because this tutorial tested by me any error or issue and also this is simple method for everyone who know about android software related this tutorial use new user technician let's see how to flash intex aqua desire with sp flash tool ?

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua Desire Firmware or Flash tool Download here

Required for flash:

1. Intex Aqua desire device with good battery charged

2. Intex Aqua desire tested firmware or flash tool

3. Micro usb cable

4. Computer or Laptop

Procedure:

1. Download tested firmware or flash tool from above link (if link not working just write down comment on below comment box) 2. Extract winrar file to desktop or as you like path (must installed winrar software in your computer or laptop) 3. Open SP Flash Tool v3.1344.214 flash tool  folder and choose flash_tool.exe file and open it 4. Click on Scatter-Loading button and choose MT6572_Android_scatter.txt file 5. Click on Download button and Press and hold Volume Up button and insert usb cable then wait until driver install if driver installed in your computer or laptop then downloading automatically start into android device 6. Wait until full os install in your device (not : do not disconnect device while your device in flashing mode) 7. Congratulation you are done from many problem and problem are mention above description.

Intex Aqua Desire Flash done with sp flash tool screenshot:

Intex Aqua Desire Flash done with sp flash tool video:

Read More

How to Flash Intex Aqua I-4 Plus with flash tool ? check here with simple method

Must Read:

First back to all type data like photos, email, contacts, videos etc because this is factory firmware if don't take backup all then you will lost all type data of above mention.

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua I-4 Plus firmware download here

SP_Flash_Tool_v3.1328.0.183 download here

Required for flash:

1. Intex Aqua I-4 Plus device with well battery charged

2. Tested firmware or flash tool

3. Micro usb cable

4. Computer or Laptop

Procedure:

1. Download tested firmware or flash tool from above link (if link not working just write down comment on below comment box)

2. Extract to desktop or as you like path (must be installed winrar software in your computer or laptop)

3. Open SP Flash tool folder and choose flash_tool.exe file and open it

4. Click on Scatter-loading button and choose MT6572_Android_scatter.txt file

5. Now click on Download button

6. Press and hold Volume Up and insert micro usb cable

7. Wait until driver install, if driver installed in your computer or laptop then downloading automatically start into device

8. Wait until full install android os

9. You are done

Intex Aqua I-4 Plus flash done with flash tool screenshot:

Intex Aqua I-4 Plus flash done with flash tool video:

Read More

Intex Aqua Life II Flash done with flash tool

Must Read:

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua Life II firmware or flash tool download from here

Required for flash:

1. Intex Aqua Life II device with good battery charged

2. Intex Aqua Life II tested firmware or flash tool

3. Micro usb cable

4. Computer or Laptop

Procedure:

1. Take of all needed for flashing device from above link (if link not working then write down comment on below box)

2. Extract to desktop or as you like path (must installed winrar software in computer or laptop)

3. Open SPD Upgrade Tool vR2.9.9015 folder and choose UpgradeDownload.exe file and open it

4. Click on Firmware button (button like setting) and choose SC7731_V120_KEW_281_V1.9_150624.pac file from Firmware folder

5. Now Click on Start button (button like Play)

6. Press and hold Volume Down key and insert usb cable (must be working well micro usb cable or device key)

7. Wait until driver install, if driver installed in your computer or laptop then downloading automatically start in to device

8. Wait until full install (note : do not disconnect device while flashing)

9. You are done

Intex Aqua Life II Flash done with flash tool screenshot:

Intex Aqua Life II Flash done with flash tool video :

Read More

Intex Turbo i6 Flash done with flash tool

Must Read:

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Turbo i6 flash file download here

RESEARCHDOWNLOAD_R2.9.9008 download here

Required for flash:

1. Intex Turbo i6 phone with well battery charged

2. Intex Turbo i6 tested flash file or flash tool

3. Micro usb cable

4. Computer or Laptop

Procedure:

1. Download tested flash or flash tool from above link (if link not working then write down comment on below comment box)

2. Extract to both files in to desktop or as you like path (must be installed winrar software in your computer or laptop)

3. Open RESEARCHDOWNLOAD_R2.9.9008 folder and choose ResearchDownload.exe file and open it

4. Click on Firmware button and choose Intex_Turbo_i6_V02_India_SER.pac file

5. Now Click on Download button (button like show play button)

6. Press and hold Center key and insert usb cable

7. Wait until driver install, if driver installed in your computer or laptop then downloading automatically start in to device

8. Wait until full install (do not disconnect device while flashing)

9. You are done

Intex Turbo i6 Flash done with flash tool screenshot:

Intex Turbo i6 Flash done with flash tool video:

Read More

Intex Aqua Star HD Flash done with Miracle box

Must Read:

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua Star HD firmware or flash tool download here

Required for flash:

1. Intex Aqua Star HD device with good battery charged

2. Intex Aqua Star HD firmware or flash tool (tested)

3. Miracle box (you can use other box)

4. Micro usb cable

5. Computer or Laptop

Procedure:

1. Take firmware or flash tool from above link (if link not working just write down comment on below comment box)

2. Extract to desktop or as you like path (must be installed winrar software in your computer or laptop)

3. Open Miracle box and go to MTK tab

4. Click on Write button

5. Choose correct boot option : 8th Boot(MT65xx & MT67xx/8127)

6. Click on Firmware button and choose MT6582_Android_scatter.txt file

7. Click on Start button

8. Press and hold Volume Up button and insert usb cable (must be working well device key or micro usb cable)

9. Wait until driver install, if driver installed in your computer or laptop then downloading automatically start in to device

10. Wait until full install android os (do not disconnect device while flashing process)

11. You are done

Intex Aqua Star HD Flash done with Miracle box screenshot:

Intex Aqua Star HD Flash done with Miracle box video :

Intex Star Hd Flash done with Miracle box Logs:

  Definition Applied  
  1. Power Off Phone , Remove Battery, Insert Battery Back  
  2. Insert USB cable. In some cases Required Hold BootKey  
  3. Use Miracle Boot Key In cases Boot key not Find  
  4. Battery Should be Charged more then 50%  
  Waiting for USB Port...  
  Set MediaTek PreLoader USB VCOM (Android) (COM3)  
  Please Hold "ON" to connect with the phone...  
  Connected to Phone.  
  CPU: MT6582 SW:0001 Ver: CB00  
  Downloading Boot8 ...  
  EMMC Size: 0x01D2000000  
  Flash Type: EMMC  
  INT/EXT RAM Size: 0x0+0x0  
  Writing(Nand/eMMC)...  
  Writing MBR  
  Writing EBR1  
  Writing UBOOT  
  Writing BOOTIMG  
  Writing RECOVERY  
  Writing SEC_RO  
  Writing LOGO  
  Writing EBR2  
  Writing ANDROID  
  Writing CACHE  
  Writing USRDATA  
  Checking Sum...  
  Write Done.  
 >>Total time: 5 mins 21 s  

Read More

Intex Aqua Amoled Flash done with flash tool

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua Amoled Firmware or Flash tool download here

Required for flash:

1. Intex Aqua Amoled device with good battery charged

2. Intex Aqua Amoled tested firmware or flash tool

3. Micro usb cable

4. Computer or Laptop

Procedure:

1. First download tested firmware from above link

2. Extract to desktop or as you like path

3. Open SP Flash Tool v3.1344.214 folder and choose flash_tool.exe file and open it

4. Click on Scatter-loading button and choose MT6572_Android_scatter.txt file from firmware folder

5. Click on Download button

6. Press and hold Volume Up button and insert usb cable

7. Wait until driver install, if driver installed in your computer then downloading automatically start in to device

8. Wait until full install os in to device (do not disconnect device while device flashing)

9. You are done

Intex Aqua Amoled Flash done with flash tool screenshot:

Intex Aqua Amoled Flash done with flash tool video:

Read More

Intex Nano S Plus Flash done with flash tool

This flash file tested by me without any error working well, you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Nano S Plus Flash file or Flash tool Download here

Required for flash:

1. Intex Nano S Plus phone (no need to battery)

2. Intex Nano S Plus tested file

3. FlashTool_v5.1308.00 flash tool

4. Volcano or Miracle box for pinout setting

5. Pro Series Service Cable (7pin)

6. Computer or Laptop

Procedure:

1. Download tested flash file or flash tool from above link (if link not working so just write down comment on below comment box)

2. Extract to both files in desktop or as you like path (must installed winrar software in computer or laptop)

3. Open FlashTool_v5.1308.00 folder and choose flash_tool.exe file and open it

4. Click on Scatter/Config File button and choose BESTONE60M_OVERSEA_11B_BB.cfg file from Intex_Nano_S_Plus_V04_Indian_SER folder

5. Click Download button or shortcut key F9

6. Open Volcano box and go to detect option

7. Connect Device with Pro Series Service Cable (7pin) special cable

8. Choose [D+/D-]SPD/Anyka in Detect Type

9. Click on Detect button (wait until detect device)

10. Click on Set Pinout button

11. Wait until installing driver, if driver installed in your computer or laptop then downloading start automatically

12. Wait until full install flash file (do not unplug device)

13. You are done

Intex Nano S Plus Flash done with flash tool screenshot:

Intex Nano S Plus Flash done with flash tool video:

Read More

Intex Aqua R3 Flash done with RDA flash tool

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download Link

Intex Aqua R3 Firmware or Flash tool download here

Required for flash:

1. Intex Aqua R3 device with good battery charged (do not try with low battery)

2. Intex Aqua R3 tested firmware (R635B_Intex_R3_V11_Indian_service_total)

3. RDA Flash tool

4. Micro usb cable

5. Computer or Laptop

Procedure:

1. Download firmware or flash tool from above link (if link not working just write down comment on below comment box)

2. Extract to both file from winrar to desktop or as you like path

3. Open iedownload_eng from RDA Flash tool

4. Click on Option button (in Function option)

5. Go to tab Download Setting and Mark to : AutoSave Calibration or Format All option

6. Go to tab IMAGE Setting option click on Browse button and 

choose R635B_Intex_R3_V11_Indian_service_total.bin file

from R635B_Intex_R3_V11_Indian_service_total firmware folder and click on Save button

7. Now Click on Download button
8. Press and hold Power + Volume up button and insert usb cable

8. Wait until driver install, if driver installed in your computer then downloading automatically

9. If downloading not start when take driver after so install driver manual from smartphone-usb-driver-dev-v1.2-signed folder this folder in RAD Flash tool.

10. Wait until full install (do not unplug device)

11. You are done

Intex Aqua R3 Flash done with RDA flash tool screenshot:

Intex Aqua R3 Flash done with RDA flash tool video:

Read More

Intex Cloud Y1 v14 flash done with flash tool

Must Read:

This flash file tested by me without any error working well,  you can use this flash file when your device hang on logo problem, restarting problem, security lock problem, password lock problem, pattern lock problem etc software related problem and you can use this tutorial without any box and this is free for all who know about software in mobile, impotent for flashing first must check your micro usb cable if not good then you can't flash it so check micro usb cable second check your device battery that is impotent for flashing if your device battery low so stop your device between flash so this is impotent for flash, before you flash save your data like contact, photos, videos etc because this is factory flash file so you can't save after full flash so must remember all are impotent notes.

Download link

Intex Cloud Y1 v14 Firmware or Flash tool Download here

Require for flash:

1. Intex Cloud Y1 device with well battery charged

2. Intex Cloud Y1 Firmware

3. SP FlashTool flash tool

4. Micro usb cable

5. Computer or Laptop

Procedure:

1. Download Firmware or SP FlashTool from above link

2. Extract to desktop or as you like path

3. Open SP flash tool folder and choose flash tool.exe file

4. Click on Scatter-loading button choose MT6572_Android_scatter.txt file

5. Now Click on Download button or shortcut key F9

6. Press and hold Volume Up button and insert usb cable

7. Wait until full flash

8. You are done

Intex Cloud Y1 v.14 Flash done with Flash tool screenshot:

Intex Cloud Y1 v.14 Flash done with Flash tool video:

Read More